Course Set - HLTAID009 & UETDRMP007 (CPR & LVR) Please note the UETDRMP007 can be done on its own if you hold a current HLTAID009. Please call to discuss.

Course Set - HLTAID009 & UETDRMP007 (CPR & LVR)

This course covers the skills and knowledge required to perform a rescue from live low voltage (LV) electrical apparatus in an electricity supply industry (ESI) environment. This does not include overhead lines and underground cables. It includes the organisational workplace requirements for the inspection and use of live LV panel rescue equipment, and how it applies to ESI workers to meet work health and safety (WHS)/occupational health and safety (OHS), mobility, and mutual aid requirements.

Completing the course will provide an individual with the skills and knowledge to carry out and complete the LV panel rescue procedure and to perform cardiopulmonary resuscitation (CPR) on a casualty in a range of situations. It consists of real-life practical skills and knowledge to allow the participant to be assessed as competent in providing CPR in line with Australian Resuscitation Council (ARC) Guidelines as well as rescue procedures from an LV apparatus.

Due to the high-risk nature of the industry, the program is regarded as a mandatory requirement for specific industries in which employees are required to develop or maintain their professional skills.

Units Delivered

The following units will be included in your certificate:

    • HLTAID009 Provide cardiopulmonary resuscitation
    • UETDRMP007 Perform a rescue from a live LV panel

Provider of Training and Assessment

This course is delivered and assessed on behalf of Allens Training Pty Ltd RTO 90909 by iKit First Aid.

Important information prior to enrolment

Unit Being Delivered

The following units will be included in your certificate:

Course Set – HLTAID009 & UETDRMP007 (CPR/ LVR)

The certificate will be issued by Allen’s Training Pty Ltd RTO 90909:
    • HLTAID009 Provide cardiopulmonary resuscitation
    • UETDRMP007 Perform a rescue from a live LV panel

To view full unit details please visit www.training.gov.au

Course Delivery

This course can be delivered online and assessed in the workplace or at facility organised by the Ikit First Aid provider.

Course Duration

Course durations can vary for multiple reasons, so the durations below are the minimum possible amount.

Refresher At least 3 Hours 30 minutes
Face-to-Face At least 5 Hours
Online with face-to-face assessment At least 30 Mins
 

Prerequisite

An individual undertaking this course with Allens Training Pty Ltd will need to demonstrate the following to be eligible for entry:

  • Provide evidence of holding the required pre-requisite unit of UETDREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker
  • Physical capability to be able to meet the demands of the practical demonstration skills including CPR and performing rescue breathing techniques on manikins Physical fitness to be able to meet the demands of the practical demonstration skills including manual handling in the rescue of a mock casualty
  • Sufficient English language, literacy, numeracy and visual interpretation skills to successfully complete the course
  • Personal safety equipment (PPE) must be provided by the student and worn during practical sessions

Important note: In order to issue an accredited certificate, CPR must be performed on the floor with no exemptions. Participants will be required to demonstrate rescue breathing techniques on manikins. Participants will not have the opportunity to request an exemption from providing rescue breaths if they wish to gain a competent result in the Unit of Competency and/or qualification.

Pre-course study: Students may be required to undertake online pre-course work prior to attending the face to face session depending on the course delivery mode.

Online study: Students must have access to a computer, smartphone, tablet or other electronic device with access to the internet to complete the online/ pre-course studies.

Work Placement Arrangements

No work placement will be required as part of this course.

Learners Rights, Responsibilities and Support, including complaints

Please note that enrolment to this course is made with Allens Training Pty Ltd RTO 90909. Please refer to the student handbook located on the RTO website allenstraining.com.au for all details relating to rights and responsibilities including complaints and appeals.

Assessment Activities

Practical Performance tasks and scenarios:

  • Perform CPR on an adult (incl. the use of an AED and placing a casualty into the recovery position)
  • Perform CPR on an infant
  • Inspection and placement of rescue equipment and performing a rescue
  • Low voltage panel rescue

Theory assessment – A written exam consisting of short-answer and multiple-choice questions. All questions must be completed.

Course Fees and Payments

  • Please refer to our booking calendar for individual course fees.
  • Refund and fee protection policy – Please refer to the student handbook.
  • Payment Terms – Payment for individual participants is upfront, group booking payment terms are based on agreement between the client and service provider.

Assessment Requirements

Individuals undertaking this course will be expected to complete both written and practical assessment tasks. These are detailed in the sections following.

Entry Requirements

  • Evidence of current and valid Statement of Attainment for UEECD0007 Apply work health and safety regulations, codes and practices in the workplace, or UETDREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker, or an existing ESI or Electrotechnology qualification (or equivalent), obtained prior to commencing this training. 

Course Duration

Online study options:

  • Students must have access to a computer, smartphone, tablet or other electronic devices with access to the internet to complete the online studies.
  • The Online delivery with face to face Practical assessment delivery mode includes video assessment questions. Occasionally the student will be required to make a video of themselves, either verbally explaining or demonstrating the required assessment outcome. If you do not wish to complete video assessment questions, please consider an alternative mode of delivery (for e.g. a blended or full face to face course).

 You can view Allens Training Pty Ltd Privacy Policy here: https://allenstraining.com.au/students/student-handbook#handbook

For REFUND, NON ATTENDANCE, DEFERRAL AND CANCELLATION POLICY click on the link

Refund and Returns Policy

What happens at the course?

Assessment Requirements

Individuals undertaking this course will be expected to complete both written and practical assessment tasks.

Please note: The Online delivery with face to face Practical assessment delivery mode includes video assessment questions. Occasionally the student will be required to make a video of themselves, either verbally explaining or demonstrating the required assessment outcome. If you do not wish to complete video assessment questions, please consider an alternative mode of delivery (for e.g. a blended or full face to face course).

Switchboard safety
Check Response, Life-saving and rescue methods. Accident at work of electrician job or Maintenance worker in the control room of factory.
Course Set - HLTAID009 & UETDRMP007 (CPR & LVR)

Course duration

Enhanced Learning –  pre-course online learning plus a short 30 minute practical assessment session

Price: $130

Course completion

The following unit(s) will be awarded to successful participants in this course. The certificate will be issued by Allens Training Pty Ltd RTO 90909:

Course Set – HLTAID009 & UETDRMP007 (CPR & LVR)

To view full unit details please visit www.training.gov.au